Side Guide Roller for Conveyor Belt (Steel)
$149.00 – $319.00 USD
Our steel guide rollers keep the conveyor belt in alignment, secure the belt edge and encapsulate the full movement of the belt.
| Ships from Sault Ste. Marie, MI |
| Covered by a 2 year warranty |
| Sign in for fast checkout |
| 4 kg / 8.8 lbs |
Specs
- Made from mild carbon steel
- Contactless sealing to prevent contamination
- Roller 2.125 inches OD (53.975 mm OD)
- Shaft OD 0.750″ x 10 UNC 2A Thread
- Includes:
- 2 x Nuts
Part Numbers
| Part Number | Size | Heat Treated | Dust Covers |
|---|---|---|---|
| 2100-T | 4 1⁄8" | ✘ | ✘ |
| 2100-TD | 4 1⁄8" | ✘ | ✔ |
| 2100-HTSL | 4 1⁄8" | ✔ | ✘ |
| 2100-HTSLD | 4 1⁄8" | ✔ | ✔ |
| 2100L-TD | 12" | ✘ | ✔ |
| 2100L-HTSLD | 12" | ✔ | ✔ |
Benefits
Keep the conveyor belt in alignment: Prevent your conveyor belt from moving off course, causing material spillage, safety hazards, and unnecessary belt damage.
Outlasts rubber, UHMW, nylons, plastics, and polyurethane: Cheaper side guide rollers last months compared to a quality steel guide roller which can last years
Secure the belt edge: Maintain a safe and reliable conveyor system to optimize your production processes and minimize downtime.
Made for surface & underground mining, cement, aggregate, and corrosive rock salts: Trusted by international mining companies to operate in the harshest environments and applications.
Trusted by:
Options
Heat Treatment
We highly recommend heat-treated rollers for heavy-duty applications and maximum service life, and our soft rollers for lighter applications.
| Feature | Heat Treated (Hard) | Soft Rollers |
|---|---|---|
| Durability | Very High | High |
| Wear Resistance | Superior | Good |
| Service Life | Longer | Standard |
| Cost | $229 | $149 |
| Dust Covers | Optional (+$10) | Optional (+$10) |
| Best For | Abrasive/Heavy-Duty | Light/Medium-Duty |
Dust Cover
Mechanical dust covers prevent debris and dust from entering the inner bearing core which could lead to damaging the leading edge of the belt – we highly recommend them.
Note for installation: Dust covers are typically only needed when the guide roller is mounted above the belt (steel spindle / shaft pointing upwards), as gravity may allow contaminants to enter the bearing core.
Installations
- Near the tail and drive pulleys
- At loading and unloading zones where material is fed onto or discharged from the belt
- Before and after transition points or direction changes in the conveyor path
- In long straight sections and inclined/declined sections of the conveyor
- Areas of high belt tension
- On the carry (top) side and return (bottom) side of long conveyors over 200 ft long or with high speeds, installed every 100 ft
- Where the conveyor experiences pronounced belt run-off tendency and considerable transverse forces (e.g. side loading, diverter bars, multiple redirections in belt path)
- Behind the loading point if there is a long slack side
- Where the same part of the belt always tends to run off regardless of its position on the conveyor (indicating potential belt damage or uneven wear)
| Size | Standard (4 1⁄8"), Long (12") |
|---|---|
| Treatment | No Heat Treatment, Heat Treatment |
| Dust Cover | No Dust Cover, Dust Cover |
| Material | Carbon steel |
| Thread | OD 0.750″ x 10 UNC 2A Thread |
Only logged in customers who have purchased this product may leave a review.
3 reviews for Side Guide Roller for Conveyor Belt (Steel)
We are using these on our reversing belts and had such good luck with the first 6 we brought in back in July, they asked me to order 8 more.
Response from PROGUIDE
Thank you David for your feedback and the pictures of the guide roller in action!
We are using both the regular guide rollers for self-aligning rollers. We just currently bought the 6” diameter rollers as well. They are great products!
Ontario Trap Rock has been using hardened guide rollers for 4 years and have had great success with them. They more than double the life of any you can buy from OEM suppliers. With being able to change out the common size bearings, if needed, their up-time is 100%. Greasable dust covers make them last in the most harsh conditions. I highly recommend them with any conveyor in the rack or return side applications.